Colorado wildfire update: Latest on the Pine Gulch, Grizzly Creek, Cameron Peak and Williams Fork fires

Wildfires continue to burn across Colorado, as dry conditions and low relative humidity make for dangerous fire conditions.

The fires have sent smoke all the way to the Front Range, as crews hope for rain and work to protect structures from Grand to Mesa counties.

Federal authorities recently declared 100% of the state as abnormally dry or under drought conditions for the first time in eight years. The designation marks a two-decade shift toward greater aridity in the state as the planet warms.

Click here to skip to a specific fire: Pine Gulch fire | Grizzly Creek fire | Cameron Peak fire | Williams Fork fire | Wildfire map

Pine Gulch fire

Updated as of 11:10 a.m.

The Pine Gulch fire grew slightly overnight, burning 87,209 acres, or about 136 square miles, as it inches closer to becoming the third-largest wildfire in Colorado’s recorded history.

The wildfire, sparked by lightning July 31 and burning 18 miles north of Grand Junction, remains 7% contained, Pine Gulch fire officials said on its incident page.

“Fire behavior will likely be active and challenging again today as winds continue to align with drainages and burn in areas containing critically dry fuels,” fire officials said Tuesday morning in a news release.

For a look at just how dry it is out there, officials pointed to the moisture of the heavy logs in the Pine Gulch area. A piece of paper measures at about 6% moisture content — and the wood being consumed by the flames is at 8%. Even smaller fuels in the area have 2% moisture content, fire officials said.

The fire on Monday “became more active than desired,” officials said, with about 100 acres crossing a control line in the Mud Creek area.

Residents on Tuesday can expect more smoke columns, with significant smoke in some places.

Fire officials on Monday night said it could be several weeks before the area sees some relief.

Grizzly Creek fire

Updated as of 10:15 a.m.

The Grizzly Creek fire grew roughly 2,000 acres overnight and is now burning 27,000 acres, or about 42 square miles, with 0% containment, fire officials said Tuesday morning in a news release.

Crews on Tuesday will focus on structure protection in No Name, along with a large presence in Blair Ranch, Spring Valley and High Aspen, officials said. Spruce Ridge will also be an area of focus.

Cameron Peak fire

Updated as of 10:15 a.m.

The Cameron Peak fire grew by 1,200 acres overnight and is now burning 14,000 acres, or about 22 square miles, in Larimer County as of Tuesday morning.

Gusty winds up to 30 miles per hour and lower relative humidity in the next few days make it “very susceptible to get a head of steam,” operations section chief Paul Hohn said in a morning news briefing.

The drier weather will also bring heavier smoke to the region, Hohn said.

Crews will be doing structure protection Tuesday, including clearing brush near homes and buildings and installing sprinklers and pumps that can be activated if fires approach, Hohn said.

If the fire does approach Rocky Mountain National Park, the section chief said, the high alpine terrain makes for good conditions to fight the flames.

Williams Fork fire

Updated as of 10:15 a.m.

The Williams Fork fire, burning 15 miles southwest of Fraser, remained stable overnight as favorable winds limited its spread.

The wildfire now sits at 6,627 acres, or about 10 square miles, but has not been contained, fire officials said on the incident webpage.

The fire was active in its interior Monday, but did not grow due to northeast winds, officials said. The smoke column seen over the fire was mostly due to unburned fuels being consumed on the fire’s interior.

Crews on Tuesday will focus on protecting infrastructure and high-resource values in the area, officials said.

There are no evacuation orders for the area, though a large area of U.S. Forest Service land — including road, trails and campgrounds — has been closed.

The Grand County Sheriff’s Office recommended residents sign up for emergency notifications at gcemergency.com

Wildfire map

Click markers for details, use buttons to change what wildfires are shown. Map data is automatically updated by government agencies and could lag real-time events. Incident types are numbered 1-5 — a type 1 incident is a large, complex wildfire affecting people and critical infrastructure, a type 5 incident is a small wildfire with few personnel involved. Find more information about incident types at the bottom of this page.

Source: Read Full Article